Home submenu

• Data Catalog
• Local Weather
• ADS NASA Astrophysics Data System
• NASA Research Solicitations
• Abstracts of Funded NASA Proposals

          Welcome to the Mars Science Laboratory Archive
            Rover Environmental Monitoring Station Data
   Aug 7, 2012 (Sol 1, Ls 151.0, MY 31) to Aug 2, 2015 (Sol 1062, Ls 21.4, MY 33) [ongoing]

























Artistic view of Curiosity, where the position of the REMS Booms (containing the wind, temperature, humidity and pressure sensors) and the Ultraviolet Sensor can be seen. (Credit: NASA/JPL-Caltech)


































The Rover Environmental Monitoring Station (REMS) is MSL's primary meteorological instrument. It has been designed to record six atmospheric parameters: wind speed/direction, pressure, relative humidity, air temperature, ground temperature and ultraviolet radiation. All sensors are located around three elements: two booms attached to the rover Remote Sensing Mast (RSM), the Ultraviolet Sensor (UVS) assembly located on the rover top deck, and the Instrument Control Unit (ICU) inside the rover body. For more information regarding these parameters, see the links below.


Wind Data Graphical Display Example
Temperature Data Graphical Display Example
UV Flux Data Graphical Display Example
Humidity Data Graphical Display Example
Pressure Data Graphical Display Example

REMS has a measurement cadence of 1 Hz and typically takes 5 minute samples every hour as well as additional 60 minute samples distributed through each sol.


Useful Documents
CERTIFIED
Instrument Description Document
Calibration Information Files
Raw Data (EDR) Software Interface Specification (SIS) Document
Raw Data (EDR) Archive Volume Software Interface Specification (VOLSIS) Document
Reduced Data (RDR) Software Interface Specification (SIS) Document
Reduced Data (RDR) Archive Volume Software Interface Specification (VOLSIS) Document
References
Documents



Archive Volumes

Data Set Description Document

REDUCED DATA - Volume Directory containing the RDR data files for sols 1-1293 (pressures in pascals, temperature in Kelvin, etc.)


ADR Data Set Description Document - The REMS ADR data set contains ancillary data used in the processing of REMS data.

TEL Data Set Description Document - The REMS TELRDR data set contains processed REMS data where the counts given by the analog/digital converters from the instrument sensors have been converted to their corresponding thermal and electrical values.

ENV Data Set Description Document - The REMS ENVRDR data set contains processed REMS data converted to environmental magnitudes.

MOD Data Set Description Document - The REMS MODRDR data set contains processed REMS data converted to environmental magnitudes and corrected by factors having an influence in the measurements.

RAW DATA - Volume Directory containing the EDR data files for sols 1-1293.